Z80 Homebrew Progress
Last updated: 02 Sep 2009 - 22:26
I've made some progress on the Mark 2 project and started the Mark 3!! First the Mark 2, I've built the system that I detailed in the articles on the Mark 2. There are a few odd bugs that I spotted as I tidied the circuit diagrams to add to the articles, these will need minor re-wiring of a bit of the glue logic. I kept the system on two bits of strip-board with the CPU and the PIC on the top layer with a bit of glue logic, the rest of the system (I/O decode, memory and peripherals are all on a lower layer, interfaced with 4 ten-way pin headers and receptacles. (Pics will follow soon). The pin-outs of the connectors can be seen in the circuit diagrams.
I've done electrical testing on the system so far. All of the power pins have the right voltages on them, including the +/-10V outputs on the MAX232 chip. The clock output on the 74HC4060 chip that provides the clock for the UART is stable and at the correct frequency. The PIC also registers with the correct part number when c